Filter
Top Products
28
Main Menu (Continued)
29
VIDEO CONFIG
The underlined values are factory defaults.
Submenu Setting Description
GAMMA SELECT
*
1
2.20
2.35
2.40
2.60
FILM
1.00 to 3.00
(MANUAL SET)
Selects the gamma curve.
[2.20] Identical to STANDARD of BT-LH Series
[2.35] Identical to STDIO/PST of BT-LH Series
[2.40] CRT approximation mode
[2.60] Identical to CINEMA of BT-LH Series
[FILM] Film mode
[1.00 to 3.00(MANUAL SET)]
The gamma curve can be arbitrary changed in
increments of 0.05.
•When [FILM] is selected, the
mark is displayed for the operating status.
•The gamma curve setting is reflected for the video not while the setting item is
being changed but after the change has been confirmed.
FILM GAMMA
VARICAM
OTHER
USER1
USER2
USER3
Selects the FILM gamma mode type.
[VARICAM] For VARICAM
[OTHER] Other
[USER1/USER2/USER3] Allows you to select a user-defined value. (Factory
default setting: VARICAM)
•Fordetailsonuserdownloads,refertotheusercustomizationfunction.(→page
72)
Input Level
(Gumma curve image)
VARICAM
OTHER
Brightness
Video Gamma
COLOR TEMP.
USER 0 to 63
*
2
D93
D65
D63
D60
D56
CINEMA
VAR1
*
3
VAR2
*
3
VAR3
*
3
Selects the color temperature.
[USER 0 to 63] Setting adjustable within the range of 0 to 63 (equivalent to a
color temperature range of 3 000 K to 9 300 K)
[D93] Equivalent to a color temperature of 9 300 K
[D65] Equivalent to a color temperature of 6 500 K
[D63] Equivalent to a color temperature of 6 300 K
[D60] Equivalent to a color temperature of 6 000 K
[D56] Equivalent to a color temperature of 5 600 K
[CINEMA] Equivalent to the x: 0.314 and y: 0.351 values in the CIE
chromaticity coordinates.
[VAR1] WB (WHITE BALANCE) adjustment mode
[VAR2] WB (WHITE BALANCE) adjustment mode
[VAR3] WB (WHITE BALANCE) adjustment mode
VARnCOLOR TEMP.
USER 0 to 63
D93
D65
D63
D60
D56
CINEMA
Selecting [VAR1] to [VAR3] in [COLOR TEMP.] allows you to adjust WHITE
BALANCE VAR1 to VAR3.
*
1
This is grayed out when the same item is set for GPI and [GPI CONTROL] is set to [ENABLE].
*
2
To select [USER 0 to 63]
(1) Press the rotary knob <PICTURE>.
(2) Use the rotary knob <PICTURE> to select 0 to 63 and press the rotary knob <PICTURE>.
*
3
If [VAR1], [VAR2], or [VAR3] is selected, the mode becomes WB adjustment mode.