Filter
Top Products
- 13 -
Preparation
The AC adaptor (optional) can only be used with the
designated Panasonic DC coupler (optional). The AC
adaptor (optional) cannot be used by itself.
1 Open the card/battery door.
2 Insert the DC coupler, being careful of the direction.
3 Close the card/battery door.
•
Ensure that the card/battery door is closed.
4 Open the DC coupler cover A.
5 Plug the AC adaptor into an electrical outlet.
6 Connect the AC adaptor B to the [DC IN] socket C of
the DC coupler.
D Align the marks and insert.
•Ensure that only the AC adaptor and DC coupler for this
camera are used. Using any other equipment may cause
damage.
•Always use a genuine Panasonic AC adaptor (optional).
•Some tripods cannot be attached when the DC coupler is connected.
•Make sure to unplug the AC adaptor when you open the card/battery door.
•If the AC adaptor and DC coupler are not necessary, then remove them from the digital camera.
Also, please keep the DC coupler cover closed.
•Also read the operating instructions for the AC adaptor and DC coupler.
When using an AC adaptor, ensure that the Panasonic DC coupler (optional) and AC
adaptor (optional) are used.