Filter
Top Products
- 139 -
Wi-Fi
Search for available wireless access points.
•Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
•When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless
access point you are using.
1 Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
•
Pressing [DISP.] will search for a wireless access point again.
• If no wireless access point is found, refer to “When connecting with
[Manual Input]
” on P139.
2 (If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters, refer to “Entering Text” section
on P80.
∫ When connecting with [Manual Input]
1 On the screen displayed in step 1 of “If you are not sure about the WPS
compatibility (connecting by [Manual Connection])”, select [Manual Input] by
pressing 3/4, then press [MENU/SET].
2 Enter the SSID of the wireless access point you are connecting to, then select [Set].
•
For details on how to enter characters, refer to “Entering Text” section on P80.
3 Press 3/4 to select the network authentication type, and press [MENU/SET].
•
For information on network authentication, see the manual of the wireless access point.
4 Press 3/4 to select the encryption type, and press [MENU/SET].
•
The type of settings that can be changed may vary depending on the details of network
authentication settings.
5 (When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
•
Check the wireless access points instruction manual and settings when a saving wireless access
point.
•If no connection can be established, the wireless access point’s radio waves may be too weak. Refer
to
“Message Display” (P196) and “Troubleshooting” (P200) for details.
•Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
If you are not sure about the WPS compatibility (connecting by [Manual Connection])
Network authentication type Encryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]/[WEP]