Panasonic DMC-SZ9 Webcam User Manual


 
- 198 -
Others
[This battery cannot be used]
Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic
battery is used, contact the dealer or Panasonic.
If the battery terminal is dirty, clean it and remove any objects.
[Failed to connect wireless access point]/[Connection failed]/[No destination found]
Check following regarding the wireless access point.
> The wireless access point information set on this unit is wrong. Check the authentication type,
encryption type, and encryption key. (P139)
> Power of the wireless access point is not turned on.
> Setting of the wireless access point is not supported by this unit.
Check the network setting of the destination.
Radio waves from other devices may block the connection to a wireless access point. Check other
devices that are connected to the wireless access point and devices that use the 2.4 GHz band.
[No picture to send]
This is displayed when there is no image to transmit due to the restriction of the destination. Check
the file type of the image to transmit. (P129)
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
Radio waves from the wireless access point are getting weak. Perform the connection closer to the
wireless access point.
There is no reply from the server or it has exceeded the communication processing time. Try again
after a while.
Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed. Reconnect the connection again.
[Upload to the Cloud Folder is available after Cloud Sync settings have been set up on
downloadable devices such as PCs or smartphones.]
Devices that download images from a cloud folder are not registered.
Perform Cloud Sync setting. Configure the settings on a PC with “PHOTOfunSTUDIO” or on a
smartphone/tablet with “Image App”. Refer to P148 for details on [Cloud Sync. Service].
[Connection failed]
Check following regarding the smartphones/tablet you intend to connect.
> The smartphone/tablet does not operate.
> Change the access point to connect to in the smartphone/tablet Wi-Fi settings to this camera.
> There is no free storage space on the smartphone/tablet.
[Login failed. Please check Login ID and Password.]
Login ID or password for the “LUMIX CLUB” is not correct. Please enter it again. If you have
forgotten the login ID or the password, there is information in the login screen of the “LUMIX CLUB”
website.