Filter
Top Products
- 54 -
Basic
•Refer to P38 for information about how to play back pictures.
•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the
OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording
information etc. to be added. It was established by “JEITA (Japan Electronics and Information
Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.
•Pictures are not rotated during Multi Playback.
•Press [MENU/SET] on the version display screen to display information about the software on the
unit.
•Do not turn the camera off during formatting.
•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
•If the card has been formatted on a PC or other equipment, format it on the camera again.
•It may take longer to format the built-in memory than the card.
•If you cannot format, contact the dealer or Panasonic.
•If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
M [Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[ ] ([On]):
Rotate pictures on a TV and the LCD monitor so that they are
displayed vertically.
[ ] ([External Only]):
Pictures are displayed vertically by rotating when played back on TV.
[OFF]
[Version Disp.]
It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
~ [Language]
Set the language displayed on the screen.