Panasonic DMC-SZ9 Webcam User Manual


 
- 168 -
Wi-Fi
How to Use the [Wi-Fi Setup] Menu
For details on how to select the [Wi-Fi] menu settings, refer to P44.
Configure the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P44)
2 Press 3/4 to select item, and press [MENU/SET].
Refer to P159 for details.
Refer to P163 for details.
For details on how to enter characters, refer to Entering Text section on P80.
If you are using the PC with standard settings, you do not need to change the workgroup.
For details on how to enter characters, refer to Entering Text section on P80.
Up to 32 characters can be entered for [A], [a], [1], and [&].
[Smart Transfer]
[LUMIX CLUB]
Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as the
destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Close the menu after changing settings.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
[Device Name]
You can change the name of this unit.
1 Press [DISP.].
2 Enter the desired device name.