Filter
Top Products
- 146 -
Wi-Fi
1 Press [Wi-Fi].
2 Press 3/4/2/1 to select [New Connection], and then
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination
from [History Connection] (P135) or [Favorite Connection] (P136).
3 Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4 Press 3/4 to select [PC], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET].
6 Press 3/4 to select the PC you want to connect to, and then press [MENU/SET].
7 Press 3/4 to select the destinations folder of the PC, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.]. (P145)
8 Take pictures.
•
To change the setting or disconnect, press [Wi-Fi]. (P142)
You cannot change the settings while sending pictures. Wait until sending is complete.
•Folders sorted by the sent date are created in the specified folder, and pictures are saved in those
folders.
•If the screen for a user account and password entry appears, enter the one you set on your PC.
When sending images to PC
Preparations:
•
Turn the computer on.
•Prepare folders for receiving images on the PC before sending a picture to the PC. (P147)
•If the workgroup of the destination PC has been changed from the standard setting, you also need
to change the setting of this unit in [PC Connection]. (P168)
[Via Network]
When you want to connect to your PC via a wireless access point.
(P138)
[Direct]
When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P140)