Filter
Top Products
- 200 -
Others
Troubleshooting
First, try out the following procedures (P200–212).
•
This phenomenon occurs when charging in a location where the temperature is very high or very
low.
> Reconnect the USB connection cable (supplied) in a location where the ambient temperature
(and the temperature of battery) is in a 10 oC to 30 oC (50 oF to 86 oF) range, and try charging
again. [If you reconnect the USB connection cable (supplied) when the unit is fully charged, the
charging lamp will turn on for approximately 15 seconds.]
•The battery is exhausted. Charge the battery.
•If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [Economy]. (P51)
•If you connect to a TV compatible with VIERA Link with an HDMI micro cable (optional) and turn the
TV off with the remote control for the TV, this unit is also turned off.
> If you are not using VIERA Link, set [VIERA Link] to [OFF]. (P53)
•Insert the battery securely all the way in. (P12)
If the problem is not resolved, it may be improved by selecting [Reset] (P52) on the
[Setup] menu.
Battery and power source
The charging lamp has gone off but the unit has not been charged.
Or the charging lamp blinks.
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
This unit is turned off automatically.
Card/battery door does not close.