Filter
Top Products
1. Introduction and Installation
15
3 Open the back cover (1).
4 Insert the blue core of the front ink film roll
(1) into the right slot of the unit (2). Insert
the gear with the blue core (3) into the left
slot of the unit (4). Insert the rear ink film roll
(5).
L The ink film is safe to touch, and will not
rub off on your hands like carbon paper.
5 Turn the gear with the blue core (1) in the
direction of the arrow.
L Make sure that the ink film is wrapped
around the blue core (2) at least once.
6 First close the back cover securely (1) by
pushing down on the dotted area at both
ends (2). Then close the front cover
securely (3).
1.8.2 Replacing the ink film
The included film roll is a starter ink film. To
ensure that the unit operates properly, we
recommend the use of Panasonic replacement
film. See page 11 for accessory information.
L We cannot be responsible for any damage to
the unit or degradation of print quality which
1
2
3
4
5
1
1
Slack/Crease
Reverse
Correct
Incorrect
Tight
1 turn
The ink film is not wrapped
around the blue core.
2
2
1
3
FC195AL.book Page 15 Tuesday, November 18, 2003 10:28 AM