Filter
Top Products
3. Telephone
27
3 TelephoneMaking and Answering Calls
3.1 Making phone calls
3.1.1 With the handset
Important:
L To prevent battery consumption, be sure
to press {ih} if a busy tone sounds
when/after using the handset.
1 Lift the handset and press {C}.
2 Dial the telephone number.
3 When finished talking, press {ih} or place
the handset on the base unit.
To redial the last number dialled from the
handset
Press {C}, then press {R}.
To redial using the redial list
The last 10 numbers dialled with the handset are
stored in the redial list.
1. Press {R}.
L The last number dialled is displayed.
2. Press {e} or {v} repeatedly to select the
number.
L To exit the list, press {ih}.
3. Press {C}.
To edit a number in the redial list before
calling back
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
number.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“EDIT CALL NO”.
5. Press {>}.
L The first digit of the number flashes.
6. Press {<} or {>} to move to the position to
the right of where you want to edit the
number.
7. Edit the number.
L To clear a digit, press {C}.
8. Press {C}.
To erase numbers in the redial list
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
number.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“CLEAR”.
L If you want to erase all numbers in the list,
select “ALL CLEAR”.
5. Press {>}.
6. Press {e} or {v} to select “YES”.
7. Press {>} or {j}.
L To erase other numbers, repeat steps 2 to
7.
8. Press {ih}.
To store a number from the redial list into
the phonebook
Numbers in the redial list can be stored into the
phonebook (page 29).
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
number.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“SAVE TEL NO”.
5. Press {>}.
L The first 2 digits are the index number.
6. Press {j}.
7. Enter the name, up to 9 characters (see the
character table on page 29).
8. Press {j}.
Key lock
You can lock the handset dialling buttons. Only
incoming calls are accepted while the key lock is
on. Emergency calls cannot be made until
key lock is cancelled.
To turn on key lock, press and hold {j} for more
than 2 seconds.
L A beep will sound and the following will be
displayed.
{<}{>}{e}{v}
{j}
{ih}
{C}
{R}
{C}
FC195AL.book Page 27 Tuesday, November 18, 2003 10:28 AM