Filter
Top Products
7. Answering Device
50
1 Press {MENU}.
2 Press {#}, then {6}{1}.
3 Press {A} or {B} repeatedly to select
“RECORD”.
4 Press {SET}.
5 Speak clearly about 20 cm away from the
microphone.
L The display will show the remaining
recording time.
6 When finished recording, press {STOP}.
L The unit will repeat your message.
7 Press {MENU}.
To check the transfer greeting message
1. Press {MENU}, {#}{6}{1}.
2. Press {A} or {B} repeatedly to select
“CHECK”.
3. Press {SET}.
L The unit will play the message.
4. Press {MENU}.
To erase your transfer greeting message
1. Press {MENU}, {#}{6}{1}.
2. Press {A} or {B} repeatedly to select
“ERASE”.
3. Press {SET}.
4. Press {MENU}.
Note:
L When transferring a call, the pre-recorded
transfer greeting message will be played.
Pager call
This feature allows your unit to call your pager
when your unit receives a fax document or an
incoming voice message.
1. Press {MENU}.
2. Press {#}, then {7}{0}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your pager number and/or pauses (up
to 46 digits).
Example:
1 202 555 1234PP12345678PP5555#
– 1 202 555 1234: Your pager number
– PP: Pauses
– 12345678: Your pager access code, if
required.
– 5555 (example): Message you want
displayed on your pager.
6. Press {SET}.
L The unit will dial the stored number.
7. Check that your pager received the pager
test call.
8. Press {DIGITAL SP-PHONE}.
When your pager receives a pager call
Your pager will display the message you entered
in step 5 (for example:5555).
FC195AL.book Page 50 Tuesday, November 18, 2003 10:28 AM