Filter
Top Products
8. Programmable Features
57
4. Press {e} or {v} repeatedly to display
“TONE OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display the
desired item.
For the key tone, select “KEY TONE”.
For the call waiting tone, select “CALL
WAITING”.
For the range warning alarm, select
“RANGE ALARM”.
For the battery low alarm, select “BATTERY
LOW”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select “ON”
or “OFF”.
9. Press {>} or {j}.
10.Press {ih}.
Display option settings
Selecting the standby mode display
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“SETTING HS”.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“DISPLAY OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display
“STANDBY MODE”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired setting.
“CLOCK” (default): Time and date will be
displayed. Set the time and date on the
handset beforehand (page 23).
“OFF”: Deactivates this feature.
“BS NO”: The base unit number will be
displayed.
“HS NO”: The handset number will be
displayed.
9. Press {>} or {j}.
10.Press {ih}.
Note:
L If you subscribe to a Caller ID service, the
display will show the number of new calls
even if “CLOCK” has been selected.
Selecting the talk mode display
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“SETTING HS”.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“DISPLAY OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display
“TALK MODE”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired setting.
“TALK TIME” (default): Length of a call will
be displayed.
“PHONE NO”: A phone number will be
displayed.
9. Press {>} or {j}.
10.Press {ih}.
Note:
L Even if you select “PHONE NO”, the other
party’s telephone number will not appear on
your display in the following cases:
– When you receive calls without
subscribing to a Caller ID service, or
– When you switch a call from the base unit
to the handset.
Selecting the display language
1. Press {j}.
2. Press {e} or {v} repeatedly to display
“SETTING HS”.
3. Press {>}.
4. Press {e} or {v} repeatedly to display
“DISPLAY OPT”.
5. Press {>}.
6. Press {e} or {v} repeatedly to display
“LANGUAGE”.
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired language from “ENGLISH” (default),
“GERMAN”, “SPANISH”, “FRENCH”,
“ITALIAN”, “DUTCH”, “TURKISH”,
“HUNGARIAN”, “PORTUGUESE”, “POLISH”
and “F43 00”.
9. Press {>} or {j}.
10.Press {ih}.
Note:
L If you set a language you cannot read, reset
the handset settings to their default settings
(page 59).
L If “F43 00” is selected in step 8, the
Command Interface will be displayed instead
FC195AL.book Page 57 Tuesday, November 18, 2003 10:28 AM