Filter
Top Products
8. Programmable Features
52
Code #06: Changing the ring setting in
TAD/FAX mode
TAD RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in TAD/FAX mode. You can select
“2” (default), “3”, “4”, “5”, “6”, “7”, “8”, “9”, “TOLL
SAVER” or “RINGER OFF”. See page 40 for
details.
L Set feature #77 to “TAD/FAX” (page 55)
beforehand.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “2” (default), “3”, “4”, “5”, “6”, “7”,
“8” or “9”.
L Set feature #77 to “FAX ONLY” (page 55)
beforehand.
Code #10: Changing the maximum incoming
message recording time
RECORDING TIME
=VOX [±]
“VOX” (default): Unlimited.
“1-9 MIN”: 1 minute to 9 minutes.
Code #11: Setting the remote operation ID
REMOTE TAD ID
=ON [±]
1. Press {MENU}.
2. Press {<} or {>} repeatedly to select this
feature.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter any 3-digit number except a number
using 0 or 7.
L The default ID is “222”.
6. Press {SET}.
7. Press {MENU}.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A [±]
You can select “A” (default), “B” or “C”.
Code #19: Setting the clock entry/display
CLOCK DISPLAY
=12H [±]
This feature changes the clock format for when
the line is indicated in printed reports and lists, or
displayed on the base unit.
“12H” (default): 12 hour clock
“24H”: 24 hour clock
8.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON [±]
“ON” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 36).
“OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=OFF [±]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
L This feature is not available for broadcast
transmission.
L The calling charge may be higher as the
transmission speed is slowed down.
“ON”: After transmission, this feature will turn off
automatically.
“OFF” (default): Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF [±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. Press {MENU}.
3. Press {#} then {2}{5}.
4. Press {A} or {B} repeatedly to select “ON”.
5. Press {SET}.
6. Enter the fax number.
7. Press {SET}.
FC195AL.book Page 52 Tuesday, November 18, 2003 10:28 AM