Filter
Top Products
3. Telephone
29
3.2.2 With the base unit
1 When “INCOMING CALL” is displayed, press
{DIGITAL SP-PHONE} and talk into the
microphone.
2 When finished talking, press {DIGITAL SP-
PHONE}.
3.3 Handset locator
Using this feature, you can locate the handset if
it has been misplaced.
L Keep the front cover page open for button
locations.
1 Press {LOCATOR/HOLD} .
L The base unit will page the handset for
about 1 minute.
2 To stop paging, press {LOCATOR/HOLD}
on the base unit or {C} / {INT} on the
handset.
Note:
L This feature is not available while using
{DIGITAL SP-PHONE}.
Automatic Dialling (Handset)
3.4 Storing names and
telephone numbers into
the phonebook
Up to 20 telephone numbers can be stored in the
handset’s phonebook for quick access.
1 Press {j}.
2 Press {>}.
3 Enter the telephone number, up to 24 digits.
L The first 2 digits are the index number.
4 Press {j}.
5 Enter the name, up to 9 characters (see the
character table).
6 Press {j}.
L To program other entries, repeat steps 3
to 6.
7 Press {ih}.
To select characters with the dial keypad
{DIGITAL SP-PHONE}
Keys Characters
{1} #[ ] * , – /1
{2} ABC2
{3} DEF3
{4} GHI 4
{5} JKL5
{6} MNO6
{7} PQRS7
{8} TUV8
{9} WXYZ9
{0} (Space) 0
{C}
{<}{>}{e}{v}
{j}
{ih}
{k}
FC195AL.book Page 29 Tuesday, November 18, 2003 10:28 AM