Filter
Top Products
2. Preparation
23
Initial Programming
2.6 Date and time
You must set the date and time for both the
handset and the base unit.
2.6.1 Setting the time and date
on the handset
Important:
L Confirm that the power cord is connected.
L Ensure that w is not flashing.
L If a power failure occurs, the time and date
for the handset needs to be reset.
1 Press {j}.
2 Press {e} or {v} repeatedly to display the
following.
3 Press {>}.
4 Press {*}.
5 Enter the current hour/minute by selecting 2
digits for each.
Example: 15:15 (24 hour clock entry)
Press {1}{5}{1}{5}.
L If you make a mistake, press {C}. Digits
are cleared from the right.
6 Press {>} or {j}.
7 Press {>}.
8 Press {*} 2 times.
9 Enter the current day/month/year by
selecting 2 digits for each.
Example: 10 August, 2003
Press {1}{0} {0}{8} {0}{3}.
L If you make a mistake, press {C}. Digits
are cleared from the right.
10 Press {>} or {j}.
11 Press {ih} to exit the program.
2.6.2 Setting the date and time
on the base unit
1 Press {MENU}.
SYSTEM SET UP
PRESS NAVI.[()]
2 Press {<} or {>} repeatedly to display the
following.
SETDATE&TIME
PRESS SET
3 Press {SET}.
L Cursor (|) will appear on the display.
D:|01/M:01/Y:03
TIME: 12:00AM
4 Enter the current day/month/year by
selecting 2 digits for each.
{>}{e}{v}
{j}
{ih}
{C}
{MENU}
{SET}
{<}{>}
FC195AL.book Page 23 Tuesday, November 18, 2003 10:28 AM