Filter
Top Products
ENGLISH - 107
Chapter 4 Settings — [NETWORK] menu
[Tools] page
Click [Tools] on the control page.
1
2
3
4
5
1 [Control System]
Set the information required for communicating with the
controller to be connected with the projector.
2 [User Password]
Set the user rights password for the RoomView control page.
3 [Admin Password]
Set the administrator rights password for the RoomView control
page.
4 Network Status
Displays the settings of wired LAN.
[DHCP]
Displays the current setting.
[Ip Address]
Displays the current setting.
[Subnet Mask]
Displays the current setting.
[Default Gateway]
Displays the current setting.
[DNS Server]
Displays the current setting.
5 [Exit]
Returns to the control page.
[Info] page
Click [Info] on the control page.
4
5
6
7
1
2
3
8
1 [Projector Name]
Displays the projector name.
2 [Mac Address]
Displays the MAC address.
3 [Lamp Hours]
Displays the cumulative operating time (converted value) of the
lamps.
4 [Power Status]
Displays the status of the power.
5 [Source]
Displays the selected image input.
6 [Lamp Mode]
Displays the lamp mode.
7 [Error Status]
Displays the error status.
8 [Exit]
Returns to the control page.