Filter
Top Products
52 - ENGLISH
Chapter 4 Settings — Menu navigation
1)
Press the <DEFAULT> button on the remote
control.
&2175$67
$'-867
Note
rf
You cannot reset all the settings to the factory default at once.
rf
To reset all the settings adjusted in the sub-menu item to the factory default at a time, perform initialization from the [PROJECTOR SETUP]
menu
→
[INITIALIZE] (
x
page 84).
rf
Some menu items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
rf
The triangular mark under the bar scale in the individual adjustment screen indicates the factory default setting. The position of the triangular
mark varies by the selected input signals.
Current adjustment value
Factory default setting
Main menu
The following 10 items are in the main menu.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
Main menu item Page
[PICTURE] 52
[POSITION] 53
[ADVANCED MENU] 53
[DISPLAY LANGUAGE] 53
[DISPLAY OPTION] 53
[PROJECTOR SETUP] 54
[TEST PATTERN] 54
[SIGNAL LIST] 54
[SECURITY] 54
[NETWORK] 54
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
[PICTURE]
Sub-menu item Factory default Page
[PICTURE MODE] [STANDARD]
*
55
[CONTRAST] [0] 55
[BRIGHTNESS] [0] 55
[COLOR] [0] 56
[TINT] [0] 56
[COLOR TEMPERATURE] [DEFAULT] 56
[WHITE GAIN] [10] 57