Filter
Top Products
ENGLISH - 37
Chapter 2 Getting Started — Connections
Connections
Before connecting to the projector
rf
Before connecting, carefully read the operating instructions for the external device to be connected.
rf
Turn off the power of all devices before connecting cables.
rf
Acquire any connection cable necessary to connect the external device to the system that is either not supplied with the device or not
available as an option.
rf
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In this case, a time base
corrector (TBC) must be connected.
rf
The projector accepts video signals, S video signals, analog RGB signals (synchronous signals are TTL level), and digital signals.
rf
Some computer models are not compatible with the projector.
rf
Use a cable compensator when you connect devices to the projector using long cables. Otherwise the image may not display properly.
rf
Refer to “List of compatible signals” (
x
page 125) for the types of video signals that can be used with the projector.
<S-VIDEO IN> terminal pin assignments and signal names
Outside view Pin No. Signal name
(1) (2)
(3) (4)
(1) Ground (luminance signal)
(2) Ground (color signal)
(3) Luminance signal
(4)
Color signal
<RGB 2 IN> terminal pin assignments and signal names
Outside view Pin No. Signal name
(10)
(6)
(11) (15)
(1) (5)
(1) R/P
R
(4) and (9) are not used.
(5) - (8), (10), and (11) are GND terminals.
(2) G/Y
(3) B/P
B
(12) DDC data
(13) SYNC/HD
(14) VD
(15) DDC clock
<DVI-D IN> terminal pin assignments and signal names
Outside view Pin No. Signal name Pin No. Signal name
(17)(24)
(16) (9)
(1)(8)
(1) T.M.D.S data 2
-
(13) ―
(2) T.M.D.S data 2+ (14) +5 V
(3) T.M.D.S data 2/4 shield (15) GND
(4) ― (16) Hot plug detection
(5) ― (17) T.M.D.S data 0
-
(6) DDC clock (18) T.M.D.S data 0+
(7) DDC data (19) T.M.D.S data 0/5 shield
(8) ― (20) ―
(9) T.M.D.S data 1
-
(21) ―
(10) T.M.D.S data 1+ (22) T.M.D.S clock shield
(11) T.M.D.S data 1/3 shield (23) T.M.D.S clock+
(12) ― (24) T.M.D.S clock
-
<HDMI IN> terminal pin assignments and signal names
Outside view Pin No. Signal name Pin No. Signal name
Even-numbered pins (2) to (18)
(1) (19)
(2) (18)
Odd-numbered pins (1) to (19)
(1) T.M.D.S data 2+ (11) T.M.D.S clock shield
(2) T.M.D.S data 2 shield (12) T.M.D.S clock
-
(3) T.M.D.S data 2
-
(13) CEC
(4) T.M.D.S data 1+ (14) —
(5) T.M.D.S data 1 shield (15) SCL
(6) T.M.D.S data 1
-
(16) SDA
(7) T.M.D.S data 0+ (17)
DDC/CEC
GND
(8) T.M.D.S data 0 shield (18) +5 V
(9) T.M.D.S data 0
-
(19) Hot plug detection
(10) T.M.D.S clock+