Filter
Top Products
26 - ENGLISH
Chapter 2 Getting Started — Setting up
Setting up
Projection method
You can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment.
Mounting on the ceiling and projecting forward Setting on a desk/oor and projecting from rear
(Using the translucent screen)
Menu item
*
Method Menu item
*
Method
[PROJECTION METHOD] [FRONT/CEILING] [PROJECTION METHOD] [REAR/FLOOR]
[COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Setting on a desk/oor and projecting forward
Menu item
*
Method Menu item
*
Method
[PROJECTION METHOD] [REAR/CEILING] [PROJECTION METHOD] [FRONT/FLOOR]
[COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]
* For menu item details, refer to the [PROJECTOR SETUP] menu
→
[PROJECTION METHOD] (
x
page 75) and [COOLING CONDITION]
(
x
page 76).
Parts for ceiling mount (optional)
You can install the projector on the ceiling using the optional ceiling mount bracket (ET-PKD56H: for high ceilings, or ET-PKD55S: for low
ceilings).
rf
Use only the ceiling mount brackets specied for this projector.
rf
Refer to the installation manual for the ceiling mount bracket when installing the bracket and the projector.
Attention
rf
To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualied
technician.