Filter
Top Products
68 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
[DISPLAY OPTION] menu
Select [DISPLAY OPTION] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
rf
After selecting the item, press
asqw
to set.
[COLOR MATCHING]
You can correct the color difference between the sets when multiple sets are to be used simultaneously.
To adjust the color matching as desired
1)
Press as to select [COLOR MATCHING].
2)
Press qw to switch [COLOR MATCHING].
rf
The setting will change among [OFF], [3COLORS], [7COLORS]
and [MEASURED] each time you press the button.
3)
Select [3COLORS] or [7COLORS], and press
the <ENTER> button.
rf
The [3COLORS] or [7COLORS] screen is displayed.
4)
Press as to select [RED], [GREEN] or [BLUE]
([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],
[YELLOW], or [WHITE] for [7COLORS]).
5)
Press the <ENTER> button.
rf
The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE],
or [3COLORS:WHITE] screen is displayed.
In the case of [7COLORS], the [7COLORS:RED],
[7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN],
[7COLORS:MAGENTA], [7COLORS:YELLOW], or
[7COLORS:WHITE] screen is displayed.
6)
Press as to select [RED], [GREEN], or [BLUE].
rf
If [WHITE] is selected from [3COLORS], only [GAIN] can be
adjusted.
7)
Press qw to adjust.
rf
Adjustment value will change between 0
*
and 2 048.
* The lower limit differs depending on the color to be adjusted.
rr
[COLOR MATCHING]
[OFF] Color matching adjustment is not carried out.
[3COLORS] The three colors [RED], [GREEN], and [BLUE] can be adjusted.
[7COLORS]
The seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], and [WHITE] can be
adjusted.
[MEASURED] Refer to “To adjust the color matching using a colorimeter” (
x
page 68) for details about this mode.
Note
rf
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
rf
This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is
required to make a successful adjustment.
rf
Pressing the <DEFAULT> button will restore the factory default settings for all items.
rf
When [COLOR MATCHING] is set to other than [OFF], [AI] and [COLOR CORRECTION] are xed to [OFF], and [COLOR TEMPERATURE]
is xed to [USER]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)
To adjust the color matching using a colorimeter
Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], and [WHITE] to desired colors.
1)
Press as to select [COLOR MATCHING].
2)
Press qw to select [MEASURED].
3)
Press the <ENTER> button.
rf
The [MEASURED MODE] screen is displayed.
4)
Press as to select [MEASURED DATA].