Filter
Top Products
74 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
rr
Setting the two window display
[VIDEO] Displays images of [VIDEO] input on the right screen (Input B).
[S-VIDEO] Displays images of [S-VIDEO] input on the right screen (Input B).
[RGB1] Displays images of [RGB1] input on the right screen (Input B).
[RGB2] Displays images of [RGB2] input on the right screen (Input B).
[DVI-D] Displays images of [DVI-D] input on the right screen (Input B).
[HDMI] Displays images of [HDMI] input on the right screen (Input B).
[OFF] Cancels the two window display.
Note
rf
[FREEZE] is set on the Input A side.
rf
During the two window display, menu items cannot be adjusted or set.
rf
The value of the Input A side is applied to the [PICTURE] setting. (For [CONTRAST], [BRIGHTNESS], [COLOR], [TINT], and [SHARPNESS],
respective values of both Input A and B are applied.)
rf
The two window display maintains the aspect ratio selected with the <ASPECT> button on the remote control or the setting of [ASPECT].
rf
The two window display may not be available depending on the combination of input signals.
Refer to “Two window display combination list (PT-DW740U only)” (
x
page 125) for details.
[CUT OFF]
Each red, green and blue color component can be removed.
1)
Press as to select [CUT OFF].
2)
Press the <ENTER> button.
rf
The [CUT OFF] screen is displayed.
3)
Press as to select [RED], [GREEN], or [BLUE].
4)
Press qw to switch.
rf
The setting will change between [OFF] and [ON] each time you
press the button.
rr
[RED], [GREEN], and [BLUE]
[OFF] Disables cutoff.
[ON] Enables cutoff.
Note
rf
When input is switched or a signal is switched, the cutoff setting returns to its original setting ([OFF]).