Filter
Top Products
ENGLISH - 39
Chapter 2 Getting Started — Connections
rf
The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion
cable, but some devices may not project the image properly or function properly.
rf
The <DVI-D IN> terminal supports single link only.
rf
For signals that the projector can project, refer to “List of compatible signals” (
x
page 125).
rf
If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate
the projector.
rf
When the SYNC ON GREEN signal is input, do not enter sync signals to the <SYNC/HD> terminal or the <VD> terminal.
rf
When the DVI-D signal is input, EDID setting may be required depending on the connected device (
x
page 70).