Filter
Top Products
Chapter 6 Appendix — Technical information
122 - ENGLISH
Mode
Resolution
(Dots)
Scanning frequency
Dot
clock
freq.
(MHz)
Format
Plug and play
*1
Horizontal
(kHz)
Vertical
(Hz)
COMPUTER/
DVI-I
Analog EDID
DVI-I digital
HDMI/
DIGITAL
LINK
EDID1 EDID2 EDID3
SXGA
1 280 x 1 024 64.0 60.0 108.0 R/D/H
l
―
l l l
1 280 x 1 024 80.0 75.0 135.0 R/D/H
l
―
l l l
1 280 x 1 024 91.1 85.0 157.5 R/D/H ― ― ― ― ―
SXGA+
1 400 x 1 050 65.2 60.0 122.6 R/D/H
l
―
l l l
1 400 x 1 050 65.3 60.0 121.8 R/D/H ― ― ― ― ―
1 400 x 1 050 82.2 75.0 155.9 R/D/H ― ― ― ― ―
UXGA 1 600 x 1 200 75.0 60.0 162.0 R/D/H
l
―
l l l
1280 x 720
1 280 x 720 37.1 49.8 60.5 R/D/H ― ― ― ― ―
1 280 x 720 44.8 59.9 74.5 R/D/H ― ― ― ― ―
1280 x 768
1 280 x 768 39.6 49.9 65.3 R/D/H ― ― ― ― ―
1 280 x 768 47.8 59.9 79.5 R/D/H ― ― ― ― ―
1280 x 800
1 280 x 800 41.3 50.0 68.0 R/D/H ― ― ― ― ―
1 280 x 800 49.7 59.8 83.5 R/D/H ― ― ― ― ―
WXGA+ 1 440 x 900 55.9 59.9 106.5 R/D/H ― ― ― ― ―
WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 R/D/H ― ― ― ― ―
1920 x 1080 1 920 x 1 080
*3
66.6 59.9 138.5 R/D/H ― ― ― ― ―
WUXGA 1 920 x 1 200
*3
74.0 60.0 154.0 R/D/H
l
―
l l l
*1 Signals with
l
in the Plug and play columns are signals described in EDID (extended display identication data) of the projector. A signal, which
has no
l
in the Plug and play columns but has an entry in the Format column, can be input. For signals without
l
in the Plug and play columns,
resolution may not be selected in the computer even though the projector supports them.
*2 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*3 VESA CVT-RB (Reduced Blanking) compatible
Note
f
The number of display dots for PT-RZ370U is 1 920 x 1 080, and that for PT-RW330U is 1 280 x 800. A signal with a different resolution is
converted to the number of display dots and displayed.
f
The “i” at the end of the resolution indicates an interlaced signal.
f
When interlaced signals are connected, ickering may occur on the projected image.
f
DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.