Filter
Top Products
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 73
3)
Select and assign program to each day of week.
f
Press
as
to select the day of week, and press
qw
to select a program number.
f
You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set yet.
How to set a program
You can set up to 16 commands to each program.
1)
Press as to select [SCHEDULE].
2)
Press qw to select [ON], and press the <ENTER> button.
f
The [SCHEDULE] screen is displayed.
3)
Press as to select [PROGRAM EDIT].
4)
Press qw to select a program number and then press the <ENTER> button.
5)
Press as to select a command number and press the <ENTER> button.
f
You can change the page using
qw
.
6)
Press as to select [TIME], and press the <ENTER> button.
7)
Press qw to select the hour and minute, press as to set the time, and press the <ENTER> button.
8)
Press as to select [COMMAND].
9)
Press qw to switch [COMMAND].
f
The items will switch each time you press the button.
f
For [COMMAND] where detailed settings are available, the settings congured in Step 11) are displayed.
[COMMAND] [COMMAND] setting Description
[POWER ON] ― Switch on the projector.
[STANDBY] ― Enters standby.
[AV MUTE]
[OFF] Cancels the AV mute.
[ON] Turns off the video and audio.
[INPUT]
[COMPUTER] Switches to COMPUTER input.
[VIDEO] Switches to VIDEO input.
[DVI-I] Switches to DVI-I input.
[HDMI] Switches to HDMI input.
[DIGITAL LINK] Sets the input to DIGITAL LINK.
[DIGITAL LINK INPUT]
[CURRENT]
Switches to DIGITAL LINK input with the currently selected
connection.
Can only be selected when [INPUT] is set to [DIGITAL LINK].
[INPUT1] - [INPUT10]
*1
Switches to DIGITAL LINK input, and that input switches to
specied input when the Panasonic twisted-pair-cable transmitter is
connected.
Can only be selected when [INPUT] is set to [DIGITAL LINK].
[LIGHT POWER]
[NORMAL] Prioritizes luminance.
[ECO SAVE1]
Reduces average power by approximately 20 % compared to
[NORMAL] without affecting the brightness.
[ECO SAVE2]
Reduces average power by approximately 30 % compared to
[NORMAL] without affecting the brightness.
[LOW] Saves more power and reduces luminance.
[IN STANDBY MODE(AUDIO)]
[OFF] Turns off audio output during standby.
[ON] Turns on audio output during standby.
[VOLUME] [0] - [63] Sets the volume.
*1 When the Panasonic twisted-pair-cable transmitter (such as optional digital interface box (Model No.: ET-YFB100G)) is connected to the
projector, its input name is reected to [INPUT1] to [INPUT10] automatically. If an item where the input name is not reected is selected, it is
disabled.
10)
Press the <ENTER> button.
f
The [COMMAND] detailed screen is displayed.
11)
Press as to select a [COMMAND] setting.
f
For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press
qw
.