Filter
Top Products
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 59
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select the item from
the sub-menu.
Refer to “Navigating through the menu” (
x
page 41) for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[COLOR MATCHING]
You can correct the color difference between the sets when multiple sets are to be used simultaneously.
Adjusting the color matching as desired
1)
Press as to select [COLOR MATCHING].
2)
Press qw to switch [COLOR MATCHING].
f
The items will switch each time you press the button.
[OFF] Color matching adjustment is not carried out.
[3COLORS] The three colors [RED], [GREEN], or [BLUE] can be adjusted.
[7COLORS]
The seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] can be
adjusted.
[MEASURED] Refer to “Adjusting the color matching using a colorimeter” (
x
page 60) for details about this mode.
3)
Select [3COLORS] or [7COLORS], and press the <ENTER> button.
f
The [3COLORS] or [7COLORS] screen is displayed.
4)
Press as to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], or [WHITE] for [7COLORS]).
5)
Press the <ENTER> button.
f
The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE], or [3COLORS:WHITE] screen is displayed.
For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],
[7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.
6)
Press as to select [RED], [GREEN], or [BLUE].
f
If [WHITE] is selected from [3COLORS], only [GAIN] can be adjusted.
7)
Press qw to adjust.
f
Adjustment value will change between 0 and 2 048
*1
.
*1 Depends on the signal input.
Note
f
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f
This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is
required to make a successful adjustment.
f
Pressing the <DEFAULT> button will restore the factory default settings for all items.
f
If [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is xed to [USER]. (However, [WHITE BALANCE HIGH]
cannot be adjusted.)