Filter
Top Products
Chapter 1 Preparation — About your projector
ENGLISH - 19
About your projector
Remote control
$WWDFKDVWUDSDFFRUGLQJWR
XVDJHFRQGLWLRQ
)URQW 7RS
1 Remote control indicator
Flashes if any button in the remote control is pressed.
2 Power <
v
/
b
> button
Sets the projector to the standby mode when the <MAIN
POWER> switch on the projector is set to <ON>. Also sets the
projector in projection mode when the power is switched off
(standby mode).
3 Input selection (<COMPUTER>, <DVI-I>, <VIDEO>, <DIGITAL
LINK>, <HDMI>) buttons
Switches the input signal to project. (
x
page 38)
Also used to set the ID number of the remote control and
security password. (
x
page 22)
4 <MENU> button
Displays the main menu. (
x
page 41)
5 <FREEZE> button
Used to pause a video and mute the audio. (
x
page 37)
6 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(
x
page 42)
7 <FUNC1> to <FUNC3> buttons
You can assign a frequently used operation as a shortcut button.
(
x
page 39)
8 <ID SET> button
Sets the ID number of the remote control to use for a system
using multiple projectors. (
x
page 22)
9 <ID ALL> button
Use to simultaneously control all the projectors with one remote
control for a system using multiple projectors. (
x
page 22)
10 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed on the screen while the image is
adjusted automatically. (
x
page 38)
11
asqw
buttons/<RETURN> button/<ENTER> button
Used to navigate through the menu screen.
Also used to enter a [SECURITY] password or character input.
12 <AV MUTE> button
Use to temporarily turn off the audio and video. (
x
page 37)
13 <ECO> button
Displays the setting screen related to ECO management.
(
x
page 39)
14 <VOLUME+>/<VOLUME
-
> button
Adjusts the audio output volume. (
x
page 39)
15 Strap hole
16 Remote control signal transmitter
Attention
f
Do not drop the remote control.
f
Avoid contact with liquids or moisture.
f
Do not attempt to modify or disassemble the remote control.
f
When attaching the strap to the remote control, hold the strap to prevent it from swinging.
Note
f
The remote control can be used within a distance of about 15 m (49'2") if pointed directly at the remote control receiver. The remote control
can control at angles of up to ±15° vertically and ±30° horizontally, but the effective control range may be reduced.
f
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
f
The signal will be reected off the screen. However, the operating range may be limited from light reection loss due to the screen material.
f
If the remote control signal receiver directly receives strong light, such as uorescent light, the remote control may not operate properly. Use
it in a place distant from the light source.
f
The power indicator <ON (G)/STANDBY (R)> will ash if the projector receives a remote control signal.