Panasonic PT-RW330U Projector User Manual


 
Chapter 1 Preparation — Precautions for use
16 - ENGLISH
f
Panasonic Corporation or its afliate companies will never ask for your password directly. Do not divulge your password in
case you receive such inquiries.
f
The connecting network must be secured by a rewall, etc.
f
Set a password for the web control and restrict the users who can log in.
DIGITAL LINK
“DIGITAL LINK” is a technology that uses a twisted-pair-cable to transmit audio and video signals.
The projector supports the optional digital interface box (Model No.: ET-YFB100G), and the “XTP transmitter” of Extron
Electronics. With some exceptions, operation with twisted-pair-cable transmitters of other companies is not guaranteed.
For support of devices of other companies, refer to Panasonic website (http://panasonic.net/avc/projector/).
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
Cautions on use
r
To get a good picture quality
f
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over
windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the
screen.
f
The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in the period
just after switching on the power. The focus stabilizes when an image is projected continuously for 30 minutes or more.
r
Do not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and projected onto
the screen.
r
DLP chips
f
The DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that
such phenomena does not indicate malfunction.
f
Directing a high-power laser beam onto the lens surface can damage the DLP chips.
r
Light source
The light source of the projector uses LED and lasers, and has the following characteristics.
f
The luminance of the light source will decrease by duration of usage.
f
The life varies greatly depending on individual differences and usage conditions.
r
Computer and external device connections
f
When connecting a computer or an external device, use power cords and shielded cables following instructions in this
manual.
f
Use a commercial DVI-D cable with a ferrite core.