Filter
Top Products
Chapter 4 Settings — [PROJECTOR SETUP] menu
78 - ENGLISH
Setting the audio output during standby
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3)
Press as to select [IN STANDBY MODE].
4)
Press qw to switch [IN STANDBY MODE].
f
The items will switch each time you press the button.
[OFF] Turns off audio output during standby.
[ON] Turns on audio output during standby.
Note
f
When [STANDBY MODE] (
x
page 71) of [ECO MANAGEMENT] is set to [ECO], audio cannot be output during standby.
f
The projector has no built-in speakers.
Audio can be output via external audio systems connected to the audio output terminal.
Setting audio input when HDMI input is selected
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3)
Press as to select [HDMI].
4)
Press qw to switch [HDMI].
f
The items will switch each time you press the button.
[HDMI AUDIO] Outputs HDMI audio.
[AUDIO IN] Outputs audio connected via the <AUDIO IN> terminal.
Note
f
If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.
Setting audio input when DIGITAL LINK input is selected
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3)
Press as to select [DIGITAL LINK].
4)
Press qw to switch [DIGITAL LINK].
f
The items will switch each time you press the button.
[DIGITAL LINK AUDIO] Outputs DIGITAL LINK audio.
[AUDIO IN] Outputs audio connected via the <AUDIO IN> terminal.
Note
f
If COMPUTER, DVI-I, or VIDEO input is selected, audio connected to the <AUDIO IN> terminal is output.