Filter
Top Products
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 61
[AUTO SIGNAL]
Set automatic execution of auto setup.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control on
each occasion if you input unregistered signals frequently at meetings, etc.
1)
Press as to select [AUTO SIGNAL].
2)
Press qw to switch [AUTO SIGNAL].
f
The items will switch each time you press the button.
[OFF] Set input auto setup to off.
[ON]
Auto setup is automatically executed when images are changed to unregistered signals during
projection.
[AUTO SETUP]
You can set when adjusting a special signal or horizontally long (such as 16:9) signal.
1)
Press as to select [AUTO SETUP].
2)
Press the <ENTER> button.
f
The [AUTO SETUP] screen is displayed.
3)
Press qw to switch [MODE].
f
The items will switch each time you press the button.
[DEFAULT]
Select when receiving a signal whose image aspect is 4:3 or 5:4. (Supported resolutions are 640 x
400, 640 x 480, 800 x 600, 832 x 624, 960 x 720, 1 024 x 768, 1 152 x 864, 1 152 x 870, 1 280 x 960,
1 280 x 1 024, 1 600 x 1 200, and 1 400 x 1 050)
[WIDE]
Select when receiving a signal whose image aspect is wide-screen. (Supported resolutions are 720 x
400, 848 x 480, 1 280 x 720, 1 024 x 600, 1 120 x 750, 1 440 x 900, and 1 680 x 1 050)
[USER] Select when receiving a signal with a special horizontal resolution (number of display dots).
f
When [DEFAULT] or [WIDE] is selected, proceed to Step 6).
f
When [USER] is selected, proceed to Step 4).
4)
Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontal
resolution of the signal source.
5)
Press as to select [MODE].
6)
Press the <ENTER> button.
f
Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When complete, the system returns to the
[AUTO SETUP] screen.
[COMPUTER IN]
Set to match the signal to input to the <COMPUTER IN> terminal.
1)
Press as to select [COMPUTER IN].
2)
Press the <ENTER> button.
f
The [COMPUTER IN] screen is displayed.
3)
Press qw to switch [SYNC SLICE LEVEL].
f
The items will switch each time you press the button.
[LOW] Set the slice level to [LOW].
[HIGH] Set the slice level to [HIGH].