Filter
Top Products
Chapter 4 Settings — [PROJECTOR SETUP] menu
74 - ENGLISH
12)
Press the <ENTER> button.
f
The command is xed and ● is displayed at the left of the selected command.
f
After the command is xed, press the <RETURN> button or the <MENU> button to close the detailed setting menu.
13)
Press as to select [STORE], and press the <ENTER> button.
Note
f
When deleting commands that have already been set, press the <DEFAULT> button on the screen displayed in step 5).
f
If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command
number.
f
The operating time will be the local time. (
x
page 79)
f
If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with this function may not be executed.
[INITIAL STARTUP]
Set the start up method when the <MAIN POWER> switch is set to <ON>.
1)
Press as to select [INITIAL STARTUP].
2)
Press qw to switch [INITIAL STARTUP].
f
The items will switch each time you press the button.
[LAST MEMORY] Starts the projector in the condition before the <MAIN POWER> switch was turned <OFF>.
[STANDBY] Starts in standby.
[ON] Starts projecting immediately.
[STARTUP INPUT SELECT]
Set the input when the projector is switched on to start projection.
1)
Press as to select [STARTUP INPUT SELECT].
2)
Press qw to switch [STARTUP INPUT SELECT].
f
The items will switch each time you press the button.
[LAST USED] Keeps the input selected last.
[COMPUTER] Sets the input to COMPUTER.
[VIDEO] Sets the input to VIDEO.
[DVI-I] Sets the input to DVI-I.
[HDMI] Sets the input to HDMI.
[DIGITAL LINK] Sets the input to DIGITAL LINK.