Filter
Top Products
9-6 SV60951 Rev. A
9 Maintaining and Updating
Cleaning the
Deck Sensors
Wipe the deck sensor windows with a damp cloth on a regular basis and
whenever a problem occurs that might be caused by a dirty sensor such
as mail not feeding.
Cleaning Flap
Array Sensors
Run the flap array cleaning envelope through the machine once a week
or every 20,000 cycles in order to keep the flap array sensors clean.
How to Clean the Flap Array Sensors
1. Enter the following settings on the machine:
• Postage $0.00
• Sealer Off
• W-O-W Off
2. Place the flap array cleaning envelope on the feed deck with the
flap opened and inserted behind the feed deck.
3. Press Start.
4. Repeat steps 2 and 3 four more times.
Sensor locations