Filter
Top Products
4
SV60951 Rev. A
4-9
DM1000 Operating Guide
35
Mode:
Key In
Postage
You can select the Key In Postage screen from the Mode menu. However,
the Key in Postage screen also appears as the main screen after power up.
How to Use Key In Postage
1. Press the Mode key.
2. Select Key In Postage.
3. When the “Ready” screen appears, type in the postage amount
using the number keys on the IntelliLink Control Center.
4. Press Enter.
5. Select Account and follow the prompts. (For further details, see
Selecting/Deselecting an Account to Print Postage.)
6. If printing on a piece of mail, press the Seal key and select your
sealing option.
If printing on a piece of tape, move the tape lever up for wet tape
and down for dry or pressure-sensitive tape.
7. If necessary, adjust the thickness adjustment knob and the light
mail/postcard selection knob.
8. To print on a piece of mail, place the mail on the feed deck. If you
have disabled Auto-Start, you must press Start to begin the mail
run.
To print tape, press the Tape key.
Running
Your Mail
and Tapes
3
The following pages contain all the modes available on the DM1000
mailing system. You have, by now, already decided which mode you will
be using. Follow the steps for your mode exactly. Watch the screen for
instructions and warnings.
While the machine processes the mail, the screen:
• displays status of the current job,
• instructs the operator, if necessary:
- to insert envelope
- to turn off machine
• keeps a running count of processed mail, and
• displays errors, at which point the machine
stops immediately.
Use Key In Postage if you know the correct amount of
postage for your piece of mail.