Filter
Top Products
SV60951 Rev. A
5 Mailing System Set Up
5-18
Timeouts:
Transaction
Timeout
This option is available only if your mailing machine is connected to the
AccuTrac Accounting system. Use this option if you routinely batch your
mail runs.
To specify how much time the system remains idle before it ends the
current accounting transaction, you set the timeout for 10 - 65520, in 1
second increments. The default timeout is 14,400 seconds.
1. Press the Menu key and select Set Up.
2. Select Basic Settings and then Timeouts.
3. Select Transaction Timer.
4. Enter the number of seconds (10 - 65520) using the numeric
keyboard.
5. Press the Enter key.
Timeouts:
Feeding Timeout
Use this option to specify how much time to allow before the feeder stops
after the last envelope is processed. This reduces the wear on your
machine and acts as a safety measure if you leave the machine
unattended.
You can set this timeout for 5 - 90 seconds, in 1 second increments. The
default timeout is 5 seconds.
1. Press the Menu key and select Set Up.
2. Select Basic Settings and then Timeouts.
3. Select Feeding Timeout.
4. Select one of the following:
Turn Rollers off Immediately.
Run until Stop key is pressed.
Enter the timeout range from 1 to 60. Then, enter the number of
seconds (1 - 60) using the numeric keyboard. Press Enter.
This option allows you to specify how long the system continues to feed
mail placed on the feed deck without having to press the Start key.
You can set this timeout for 0 - 90 seconds, in 1 second increments. The
default timeout is 20 seconds.
1. Press the Menu key and select Set Up.
2. Select Basic Settings and then Timeouts.
3. Select Waiting for Env.
4. Enter the number of seconds (0 - 90) using the numeric keyboard.
5. Press the Enter key.
Timeouts:
Waiting for Env