Filter
Top Products
4
SV60951 Rev. A
4-11
DM1000 Operating Guide
Mode:
Weigh First
Piece
How to Use Weigh First Piece
1. Press the Mode key.
2. If the Weigh First Piece mode is not listed, select Weighing Op-
tions.
3. Select Weigh First Piece.
4. Press the Class key to select a class.
5. Select the appropriate class from the ones displayed. If more than
one carrier is available for the class you select, use the right arrow
key to compare the rates.
6. If necessary, select a special service.
7. Press Enter. Even if you do not choose a special service, you must
press the Enter key to confirm the class.
8. Select Account and follow the prompts. (For further details, see
Selecting/Deselecting an Account to Print Postage.)
9. If necessary, adjust the thickness adjustment knob and the light
mail/postcard selection knob.
10. Press the Seal key and select your sealing option.
11. Place the mail on the feed deck. (See Preparing Your Mail in this
chapter.) If you have disabled Auto-Start, you must press Start to
begin the mail run.
The machine weighs only the first piece and processes the remaining
identical mail at the same postage rate.
Use the Weigh First Piece mode if:
• You do not know the weight of your mail.
• All mail is identical.