Filter
Top Products
2-16
SV60951 Rev. A
2 Meet the DM1000
Material
Specifications
You get the best results from your mailing system when the materials you
use conform to the specifications below. Apply tape to pieces of mail that are
too big for system processing.
Envelope Dimensions (see figure, next page)
Minimum: 3-1/2 in. x 5 in. (89 mm x 127 mm) postcard size.
Maximum: 13 in. x 15 in. (330 mm x 381 mm) without W-O-W®
13 in. x 13 in. (330 mm x 330 mm) with W-O-W
Envelope Flap Depth For Sealing
Flap Open
Minimum: .75 in. (19 mm)
Maximum: 4 in. (101.6 mm)
Flap Closed
Minimum: .75 in. (19 mm)
Maximum: 2.75 in. (69.8 mm)
Mailing Materials
NOTE: Certain types of envelopes must be fed flap open to
ensure proper sealing. These include: square flapped mail, mail
with deep, pointed flaps, and catalogs.
Envelope Thickness
Minimum: 0.007 in. (0.18 mm)
Maximum: 3/4 in. (18 mm)
Acceptable Envelope Materials Include
• Standard envelope paper
• Self-mailers
• Tri-fold mail
• Pre-sealed envelopes
Envelope Flap Profiles
• Commercial (square and baronial)
• Executive
• Monarch
Mail Weight
5 lbs. (2.27kg) maximum for each piece (Non W-O-W)
1 lb. (.45 k g) maximum for each piece (W-O-W)
Tape Roll Width
1 1/17 inches (36mm) wide
4.5 (114.3mm) or 5 inch (127mm) rolls