Filter
Top Products
4-16 SV60951 Rev. A
4 Running Mail
Mode:
Print Permit
A permit is a special postal mark with an identification number that is
issued by the Post Office and used instead of the usual meter stamp. Mail
with this postal mark must be brought to the Post Office for special
processing and rate discounts.
The permit is paid for directly to the Post Office. No Postage By Phone
®
funds are used.
Sample Permits
How To Use the Print Permit Mode
1. At the main screen press the Mode key.
2. Select Print Permit.
3. Select the permit you want. If there is only one permit available,
the permit appears on the screen as soon as you select Print
Permit mode.
4. Press Enter.
5. If necessary, adjust the thickness adjustment knob and the light
mail/postcard selection knob.
6. Press the Seal key and select your sealing option.
7. Place the mail on the feed deck. (See Preparing Your Mail in this
chapter.) If you have disabled Auto-Start, you must press Start to
begin the mail run.
Use Permit mode if:
• You are doing a bulk mailing and you want to take advantage of
your USPS permit account discount.
• You want to apply prepaid postage to an enclosed reply
envelope.
You need:
• A permit available in the IntelliLink Control Center.
• A permit account with the Post Office.
A purchaseable option.
Not in all systems
.