Filter
Top Products
SV60951 Rev. A 5-5
DM1000 Operating Guide
5
3
Setting the
Date and
Time of Day
If your mail is picked up at a certain time each day, you can set your
system to advance the date at the mail pickup time.
If you enter an invalid time or date, the system beeps and the screen
displays the message: “Invalid Time”.
To adjust the time and enter date advance:
1. Press the Menu key.
2. Select Set Up.
3. Select Time of Day.
4. You can select:
Current Time
Date will advance after
Daylight Saving
5. For Current Time or Date will advance after, enter the correct time
and date. Use the right arrow key to toggle between AM and PM.
You do not need to enter the colon (:) between hours and minutes.
Press Enter to accept the time. To return to the main screen, press
the left arrow key.
6. To turn the Daylight Saving mode on or off, use the right arrow key.
To exit the Daylight Saving mode, press the left arrow key.
NOTE: The date on the meter stamp should correspond
to the date when your mail goes to the post office.
1. Press the Menu key on the control center, and select Set Up.
2. Select Basic Settings.
3. Select AutoStart.
4. Select On or Off.
Selecting
AutoStart
4
You can select to have the feeding process begin automatically as soon as
you place mail on the feed deck.
To set the system to Auto-Start: