Filter
Top Products
12-12
12 • Maintenance
SV62261 Rev. A
4. Push the wick and shield back into moistener.
5. Reinstall the moistener. Push down on the blue re lease lever on
the moistener.
Removing the Shield and Wick (DM300c)
1. Pull up and remove the shield
and wick from the moistener.
2. Separate the wick from the
shield. Clean the wick in plain
water, and rinse thoroughly.
i
NOTE: Replace the wick
and shield if they cannot
be cleaned thoroughly.
3. Place the wick back into the
shield.
Wick
Shield
Release Lever
6. Slide the moistener back onto the machine. You should hear a
click as it engages.
Maintaining the Moistener (cont'd)
CLICK!