Filter
Top Products
7-10
7 • System Options
SV62261 Rev. A
Changing the Lock Code
You can change the Lock Code if it has been enabled.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Change Lock Code".
6. When prompted, enter the current Lock Code and select "Ac-
cept".
7. Enter the new Lock Code, and select "Accept".
8. Re-enter the new Lock Code to confirm and select "Accept". At
the "Lock Code Enabled" message, select "OK".
Enabling the Supervisor Password
The Su per vi sor Pass word prevents unauthorized access to account-
ing setup.
1. Press Menu.
2. Select "Setup".
3. If necessary, press the green down arrow key to scroll through
the menu screens.
4. Select "Lock Code/Password".
5. Select "Enable Password".
5. Enter the new Supervisor Password and select "Accept".
6. Re-enter the new Supervisor Password to confirm and select
"Accept".
7. At the "Password Enabled" message, select "OK".
Change Password
Enter New Password
***_
◄ Accept
Basic Options (cont'd)