Plasmon V15 Computer Hardware User Manual


 
Plasmon
V
15 AIT Tape Library User Manual
Page 18
Back Panel Components
Figure 4. V15 Back Panel Components
Drive carrier. Accessible from the back panel, the tape drive carrier includes a fan and two
SCSI connectors. If the library contains just one tape drive, the unused drive slot is
protected by a service access cover.
Fans. The drive and library each include a fan to reduce operating temperature.
Power entry module. The power entry module includes the AC power connector, power
switch, and fuse drawer.
9-pin serial port. A service technician can use the serial port to perform diagnostic
procedures or upgrade firmware.
Ethernet port (optional). The Ethernet port allows you to connect the library to a 10/
100BaseT Ethernet network.
SCSI connectors. The SCSI connectors allow you to connect the library and tape drive to
one or two SCSI buses.
Power Entry
Module
Drive Fan
Library SCSI
Connectors
Ethernet Port
9-pin
Drive Carrier
Serial Port
Library Fan
Drive SCSI
Connectors