Filter
Top Products
Plasmon
V
15 AIT Tape Library User Manual
Page 52
Viewing the Ethernet Security Screens
The Ethernet security screens allow you to view the read-only values for the following community access
strings: Read, Write, and Broadcast. Community strings provide security for Simple Network Management
Protocol (SNMP) communication. Ethernet security also contains information about the user name and
password for the secure transfer of library and Ethernet firmware upgrades via File Transfer Protocol
(FTP).
NOTE
You can change these values in the Library Monitor software shipped
with the library (see the Help file shipped with the software) or by
using the library’s console interface (see the Diagnostics and
Firmware chapter for more information about accessing the console
interface).
To view the Ethernet security screens:
1. From the operator panel keypad, press [MENU] to display the menus. Press the down arrow
key until “Ethernet Menu” is displayed on the screen.
2. Press [ENTER]. The Ethernet Configuration Menu displays, as shown below.
3. Press the down arrow until “Ethernet Security” displays.
4. Press [ENTER]. The first screen to appear is shown below.
E t h e r n e t M e n u
S 2 0 5 . 1 6 1 . 8 . 9
E t h e r n e t
C o n f i g u r a t i o n
E t h e r n e t
S e c u r i t y
R e a d :
“
P u b l i c
“