Filter
Top Products
UPS Setup
12
Powerware
®
9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev D www.powerware.com
2. Remove the four M4 screws securing the stabilizing bracket to
the cabinet rear panel and remove the bracket (see Figure 3).
Retain the hardware for later use.
NOTE Be sure to retain the stabilizing bracket and hardware for later
re-assembly onto the cabinet.
3. Remove the three M10 bolts securing the rear shipping pad to
the pallet and remove the shipping pad (see Figure 3).
NOTE Hold the back of the cabinet so that the bolts can be removed
easily without the cabinet rolling backward.
4. Remove the two M10 bolts securing the front shipping bracket
andremovethebracket(seeFigure3).
Stabilizing
Bracket
Front Shipping
Bracket
Shipping Pad
M4 Screws
M10 Bolts
M10 Bolts
Figure 3. Removing the Brackets and Shipping Pad