Filter
Top Products
49
Powerware
®
9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev D www.powerware.com
Chapter 8 Stabilizing the Cabinet
NOTE For seismic installations, you MUST order and install a
Powerware 9155 UPS seismic installation kit; do not use the following
instructions.
NOTE For non-seismic installations, the stabilizing bracket MUST be
installed on all 3-high cabinets. T he stabilizing bracket is optional for
2-high cabinets.
1. Lower the leveling feet to prevent the cabinet from rolling.
Figure 29. Lowering the Leveling Feet
2. Attach the stabilizing bracket to the bottom of the cabinet rear
panel using the retained hardware from the shipping pallet (see
Figure 30).
Use the holes and slots in the bottom of the bracket to attach
the cabinet to the flooring if desired.