Filter
Top Products
Cisco MDS 9000 Series Switches
Supported Switches and Firmware Versions
P
AGE 94 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
Supported Switches and Firmware Versions
The following QLogic switches have been tested in the QLogic environment and comply with the
FC-SW-2 standard. QLogic switches have tested interoperable with the following switches from
Cisco that comply with the FC-SW-2 standard.
Domain ID Configuration
To ensure that there are no conflicts between switches, we recommend that each switch have an
assigned Domain ID. The following steps show how to set the Domain ID on both the Cisco switch
and the QLogic switch.
Cisco Device Manager
1. Start Cisco Device Manager. The Device Manager dialog box displays.
2. From the Device Manager dialog box FC menu, select Domain Manager.
QLogic and Cisco Supported Switch and Firmware Versions
Manufacturer Switch Model Firmware Version
QLogic SANbox2-8 Switch 1.3.x and above
SANbox2-16 Switch 1.3.x and above
SANbox2-64 Switch 1.5.x and above
Cisco MDS 9216 Switch 1.0(1) [build 1.0(0.281)]
MDS 9509 Director 1.0(1) [build 1.0(0.281)]