Filter
Top Products
Cisco MDS 9000 Series Switches
Timeout Values
QL
OGIC SWITCH INTEROPERABILITY GUIDE PAGE 103
V
ERSION 1.0, MARCH 2003
QLogic SANbox Manager GUI
ATTENTION!!
The following steps take the switch offline; therefore, do not perform them on a
switch being managed in-band.
1. Start the SANbox Manager application. The SANbox Manager—Faceplate dialog box
displays.
2. From the SANbox Manager—Faceplate dialog box Switch menu, select Switch Properties.
For the QLogic SANbox2-8 and SANbox2-16, the following displays: