Sun StorEdge Network 2 Gb FC Series Switches
Zone Configuration
QL
OGIC SWITCH INTEROPERABILITY GUIDE PAGE 281
V
ERSION 1.0, MARCH 2003
3. From the Edit Zoning—SANbox Manager dialog box, compare the Zone Set and Zone names
from each switch to ensure there are none with the same name and the names conform to the
standards for zone naming as discussed under “Active Zone Set Names” on page 279.
For the Sun StorEdge Network 2 Gb FC Switch-8 and Sun StorEdge Network 2 Gb FC
Switch-16, the following displays:
Sun StorEdge CLI
NOTE: Use the CLI commands when the Sun StorEdge SANbox Manager GUI is not available.
The procedures are the same for the Sun StorEdge Network 2 Gb FC Switch-8, Sun
StorEdge Network 2 Gb FC Switch-16, and Sun StorEdge Network 2 Gb FC Switch-64.
Login: admin
Password: xxxxxxxx
StorEdge 2Gb FC Switch 64 #> zone list