Filter
Top Products
Brocade SilkWorm 3200 and SilkWorm 3800 Switches
Zone Configuration
P
AGE 26 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
3. From the Zone Administration dialog box, select the WWN Config tab. Verify that all config
names conform to the standards discussed under “Active Zone Set Names” and are unique
between the switches.
Brocade CLI
NOTE: Use the following CLI commands when Brocade’s Web tools are not available.
Login: admin
Password: xxxxxxxx
Brocade3800:admin> cfgshow