Filter
Top Products
Brocade SilkWorm 3200 and SilkWorm 3800 Switches
Timeout Values
P
AGE 20 QLOGIC SWITCH INTEROPERABILITY GUIDE
VERSION 1.0, MARCH 2003
Brocade CLI
Login: admin
Password: xxxxxxxx
Brocade3800:admin> configshow
Use the above command to verify that R_A_TOV is set to 10000 and E_D_TOV is set to 2000. If
these timeout values are not correct, continue with this section. If the settings are correct, no
changes need to be made; proceed with the next appropriate section.
Brocade3800:admin> switchdisable
Brocade3800:admin> configure
The following options display:
Fabric parameters (yes, y, no, n): [no] yes
Domain: (1-239) [98]
BB credits: 91-27) [16]
R_A_TOV: (4000..120000) [9000] 10000
E_D_TOV: (1000..5000) [1000] 2000
WAN_TOV: (1000..120000) [0]
WAN_RTT_DLY_MAX: (100..5000) [200]
Data field size: (256..2112) [2112]
Sequence Level Switching: (0..1) [0]
Disable Device Probing: (0..1) [0]
Suppress Class F Traffic: (0..1) [0]
SYNC IO mode: (0..1) [0]
VC Encoded Address Mode: (0..1) [0]
Core Switch PID Format: (0..1) [1]
Per-frame Route Priority: (0..1) [0]
Long Distance Fabric: (0..1) [0]
Virtual Channel parameters (yes, y, no, n): [no]
Zoning Operation parameters (yes, y, no, n): [no]
RSCN Transmission Mode (yes, y, no, n): [no]
NS Operation Parameters (yes, y, no, n): [no]
Arbitrated Loop parameters (yes, y, no, n): [no]
System services (yes, y, no, n): [no]
Portlog events enable (yes, y, no, n): [no]
Brocade:3800:admin> switchenable