Filter
Top Products
Cisco SN 5428 Storage Router
Timeout Values
QL
OGIC SWITCH INTEROPERABILITY GUIDE PAGE 81
V
ERSION 1.0, MARCH 2003
Timeout Values
As per FC-SW-2 Fibre Channel standards, set all switches to the following timeout values (TOV)
in order to successfully establish an E-port connection:
R_A_TOV = 10 seconds
E_D_TOV = 2 seconds
This section provides the steps to change these values.
NOTE: Timeout values cannot be set using the Cisco SN 5428 Management Interface nor the
Cisco CLI. Use the QLogic SANbox Manager GUI or QLogic CLI.
Cisco SN 5428 Management Interface
Not applicable.
Cisco CLI
Not applicable.