Filter
Top Products
McDATA Intrepid 6000 Series Directors
Zone Configuration
QL
OGIC SWITCH INTEROPERABILITY GUIDE PAGE 247
V
ERSION 1.0, MARCH 2003
Zone Types
All zone members must be specified by a world wide port name (WWPN) in order to comply with
Fibre Channel standards. Any zone member not specified by WWPN cannot participate in the
fabric. Below are steps to confirm the zone types.
NOTE: A world wide name (WWN) consists of a world wide node name (WWNN) and one or
more WWPNs. References in this guide to WWN actually refer to the WWPN.
1. Start McDATA SANpilot Web Management. The Main Director View dialog box displays.
2. On the navigation panel, select Configure. The Configure dialog box displays. Select the
Zoning tab, then select the Zones tab. Select each zone.